BMW F 800 R 2013, Руководство пользователя для мотоциклиста

Страница: 48 / 145

Remove on-board toolkit 1 .
Your motorcycle's hand-
ling will suffer if you do not
match the spring-preload and
damping-characteristic settings.
Adjust the damping characteristic
to suit spring preload.
If you want to increase spring
preload, use the tool from the
on-board toolkit to turn knob
2
clockwise.
If you want to reduce spring
preload, use the tool from the
on-board toolkit to turn knob
2
counter-clockwise.
Basic setting of spring
preload, rear
Turn adjusting screw as far
as it will go counter-clock-
wise, then back it off 12
clicks. (Full load of fuel, with
rider 85 kg)
Stow the on-board toolkit in its
correct position.
Install the seat (
49).
Damping
Setting
Damping must be adapted to suit
the condition of the surface on
which the motorcycle is ridden
and to suit spring preload.
An uneven surface requires
softer damping than a smooth
surface.
An increase in spring preload
requires firmer damping, a re-
duction in spring preload re-
quires softer damping.
Adjust the damping for
rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
4
46
z Operation
ProCarManuals.com