BMW F 800 R 2013, Руководство пользователя для мотоциклиста

Страница: 49 / 145

If you want to increase damp-
ing, turn adjusting screw
1
clockwise.
If you want to reduce damping,
turn adjusting screw
1 counter-
clockwise.
Basic setting of rear-sus-
pension damping charac-
teristic
Turn adjusting screw as far
as it will go clockwise, then
back it off 3/4 turns (Full
load of fuel, with rider 85 kg)
Tyres
Checking tyre pressure
Incorrect tyre pressures im-
pair the motorcycle's hand-
ling characteristics and increase
the rate of tyre wear.
Always check that the tyre pres-
sures are correct.
At high road speeds, tyre
valves installed perpendicu-
lar to the wheel rim have a tend-
ency to open.
In order to avoid sudden defla-
tion, fit valves installed perpen-
dicular to the rim with valve caps
complete with rubber seals and
make sure the valve caps are
screwed firmly on to the valves.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Check tyre pressures against
the data below.
Tyre pressure, front
2.5 bar (Tyre cold)
Tyre pressure, rear
2.9 bar (Tyre cold)
If tyre pressure is incorrect:
Correct tyre pressure.
Headlight
Adjusting headlight for
driving on left/driving on
right
If the motorcycle is ridden in a
country where the opposite rule
of the road applies, its asymmet-
ric low-beam headlight will tend
to dazzle oncoming traffic.
Have the headlight set
accordingly by a specialist
4
47
z Operation
ProCarManuals.com