EN/15
Retrofit / Installation kit No. 82 83 0 140 507
Issue date: 06.2001
Installation Instructions No. 01 29 0 140 511
10. To install the amplifier (cars with an on-board monitor radio)
0
0
0
0
Place the cut out drilling template (26) on to the
base holder (21). Mark the holes on the base
holder (21) using a centrepunch.
Drill the four centrepunch points with a diameter of
d = 4.5 mm.
0
Secure the amplifier (1) to the base holder (21) with
the fillister head self-tapping screws 3.5 x 9.5 (2).
The cable connector on the amplifier must
point to the left.
Clip the cable holder (25) into the base holder (21).
0
First connect the adapter cable
A
to the amplifier.
Attach the connection plug
A4
on the adapter
cable
A
to the plug strip (30).
Press the connection plug
A4
in the direction
indicated by the arrow with a large flat screwdriver
(31) until it audibly engages in the amplifier casing.
Only then may the base holder with the amplifier
be installed.
0
Push the expanding nuts (24) into the existing
holes. Insert the base holder (21) with the amplifier
(1) and secure it with hexagonal self-tapping
screws (23) and cap nuts (22).
Secure the cables behind the base holder (21) with
a cable holder (25).
Secure the excess length of the adapter cable
A
under the amplifier (1) on the base holder (21) with
cable ties (18).
21
039 0112 B
26
1
2
25
21
039 0113 B
039 0114 B
A4
30
A4
A
31
039 0115 B
21
1
25
30
24
23
22
23
24
18
