4. To protect the Spring Pin, cover the Pin
area with the supplied Pin Label by
aligning the two diagonally opposite
holes with H and V positions (see
Figure 4).
INSTALLATION
5. Attach the mounting bracket to the CD
Changer using the mounting hardware
(M4) shipped with the CD Changer. Use
lower mounting holes for Left side and
higher ones for right side (see Figure 5).
7. Locate the CD Audio Cable (6-pin) and
Power/I-Bus Cable (3-pin), which are
terminated behind CD changer Trunk
Trim Cover in the left side (driver's side)
of the trunk (see Figure 6).
Page 4
