The figure shows the trim (a) on the E36/5,
proceed accordingly on other models.
The spacers (7) are only required for models with
a footwell light (b).
Remove the insulation mat in the installation area
if necessary.
Position the control module (2) as shown, mark
the positions of the holes and drill them with a
4.5 mm drill bit.
Secure the control module (2) with screws M4 x
16 (3), washers (4) and nuts M4 (5) and with the
spacers (7) if necessary.
6.
To assemble the control module for the hands-free facility
4
5
2
a
b
7
3
7
F 36 0150 M
Retrofit / Installation kit No. 84 64 0 025 816, 84 64 0 026 649 Issue date: 07.2000
Installation instructions No. 01 29 0 025 885
EN/29