BMW 77 02 8 551 896, Инструкция по эксплуатации

Страница: 5 / 8

Charging pauses : If the charger is connected to the vehicle via the on-board socket, charging pauses
are inserted which are caused by the vehicle’s electronic system. The device continues to charge the
battery after release from the vehicle electronic system automatically. Charging pauses can occur in
various charging stages. xy = any % displayed in display screen.
Battery charged : If the battery is fully charged, the device can be disconnected if necessary, or
remain connected. The battery is monitored and if needed, recharged. An equalization charging
(battery maintenance) is carried out.
Note: This charging step is only carried out with a directly connected battery, e.g. using the charging
adapter provided.
Sleep mode: When the battery is fully charged, the charger switches to sleep mode to save energy.
The LED “Power” blinks. The device can continue to remain connected to the battery. The battery is
monitored and if needed, recharged. After 24 hours, the charging cycle starts again. You can wake up
the device by pressing any key on the keypad. After approx. 10 seconds, it switches back into the
sleep mode.
Charging error : If a battery cannot be charged, the device interrupts the charging; „Charging error“ is
displayed. The LED “Error” blinks. The battery could not be charged according to the charging
characteristic programmed in the device. This does not necessarily mean that the device or battery is
defective. Disconnect the charger from the mains and reconnect it. The charging process is restarted
and carried out. If a repeated attempt does not solve the problem, the battery and, if applicable, the
charger must be checked.