BMW 645Ci, Руководство пользователя

Страница: 96 / 216

Practical interior accessories
94
Practical interior accessories
Integrated universal remote
control
*
The concept
The integrated universal remote control
replaces up to three different hand-held
transmitters for various items of radio-con-
trolled equipment such as door openers
and house alarm systems. The integrated
universal remote control registers and
stores signals from the original hand-held
transmitters.
The signal of an original hand-held trans-
mitter can be programmed on one of the
three memory buttons
1
. Then the respec-
tive device can be actuated with the mem-
ory button
1 programmed for its use with
the ignition key in position 2. The indicator
lamp
2 flashes to confirm transmission of
the signal.
If you sell your vehicle one day, delete the
saved programs beforehand for your own
security, refer to page
95 .
To prevent possible damage or injury,
before programming or using the inte-
grated universal remote control, always
inspect the immediate area to make certain
that no people, animals or objects are
within the travel range of the device. Also,
comply with the safety precautions of the
original hand-held transmitter.
<
Checking compatibility
If you see this symbol on the pack-
aging or in the manual supplied with
the original hand-held transmitter, it
is safe to assume that it is compatible with
the integrated universal remote control.
If you have additional questions, please
consult your BMW Sports Activity Vehicle
Center or call 1-800-355-3515.
You can also visit these websites:
www.bmwusa.com or
www.homelink.com.
HomeLink is a registered trademark owned
by Johnson Controls, Inc.
Programming
1
Memory buttons
2 Indicator lamp
Fixed-code hand-held transmitters
1. Ignition key in position 2
2. When using for the first time: press both
outer buttons
1 for approx. 20 seconds,
maintaining pressure until the indicator
lamp
2 starts to flash. The three mem-
ory buttons 1 are cleared
3. Hold the original hand-held transmitter
at a distance of approx. 2 in/5 cm to
8 in/20 cm to the memory buttons
1
The required distance between
the hand-held transmitter and the
memory buttons
1
depends on the rele-
vant system of the original hand-held
transmitter used.
<
4. Simultaneously press the transmit but-
ton on the original hand-held transmit-
ter and the desired memory button
1
on
the integrated universal remote control.
Initially, the indicator lamp
2 flashes
slowly. Release both buttons as soon
as the indicator lamp
2 flashes rapidly.
If the indicator lamp
2
does not flash
rapidly after approx. 15 seconds,
change the distance
5. To program other original hand-held
transmitters, repeat steps 3 and 4.