7–Removing the roof function centre (FZD)
8–Remove left and right A-pillar trim panel
NOTICE
Description is for left component only. Procedure on the right side is identical.
▶
Remove the A-pillar trim panel
Additional information is available.
WARNING
Danger! Life-threatening injuries!
• Carefully unclip and remove the trim
(
1
)
using special tool
0 496 569 (00 9 325)
at the marks.
• Unlock clamps on the left and right using a screwdriver in the
direction of the arrow.
• Release the rear latch mechanisms
(
1
)
.
• Remove the roof function centre (FZD)
(
2
)
from the headlining
(
3
)
.
• Unlock all plug connections and disconnect.
Pyrotechnic components.
• All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel
only.
• Replace any damaged part or ones that have been dropped.
• For additional information see: 72 00 Safety regulations on handling components with gas generators.
REP-REP-P-5413086-F44 V - 1
VIN: XXX23ALXXXXXXXXXX
2/1/2021 8/42
© Copyright BMW Group - Subject to printing errors, mistakes and technical changes.