background image

 

EN/4

 

Retrofit/Installation kit No. 65 90 0 028 873 84 64 25,805 (others see cover sheet)
Installation Instructions no. 01 29 0 029 541 01 29 0 029 544

Issue date: 04.2001

 

2.

Preparations

 

TIS

instruction

No.

 

Conduct a brief test (print out error memory)

-

Disconnect the battery

12 00...

Remove the radio (cars without an on-board monitor radio only)

65 11 030

Remove the heater/air conditioning control

64 11 749

Remove the cover on the gearshift lever.

51 16 210

Remove the base of the centre console

51 16 200

Remove the driver’s seat

52 13 000

Remove the rear seat bench

52 24 005

Remove the rear seat backrest (cars without a split rear seat backrest only)

52 24 010

Remove the side pad on the left (cars with a split rear seat backrest only)

-

Remove the front left door sill trim

51 47 000

Remove the rear left door sill trim

51 47 030

Remove the footwell trim on the driver’s side

51 45 030

Remove the side footwell trim on the left A pillar

-

Remove the left A pillar trim (refer to instructions for head airbag)

51 43 201

Remove the left sun visor

51 16 080

Lower the front headlining slightly

-

Remove the cover on cars with a glass slide/tilt sunroof

51 44 011

Remove the left boot / wheel arch trim.

51 47 101

Remove the CD changer (if fitted)

65 11 070

Remove the audio amplifier (if fitted)

65 12 070

Remove the navigation computer (if fitted)

65 90 510

 

Also on E39 cars

 

Remove the video module (if fitted)

65 50 510

 

Also on E39/2 cars

 

Remove the combination roller blind (if fitted)

-

Remove the boot floor

51 47 101

Remove the spare wheel cover

51 47 131

Remove the spare wheel

-

Remove the cover on the on-board monitor radio

65 52 520

Remove the tool holder

-

Remove the right boot / wheel arch trim.

51 47 101

Remove the rear boot floor supports on both sides

65 11 055

Remove the front boot floor supports on both sides

65 11 055

Содержание 5 Series Saloon





































Отзывы: