EN/22
Retrofit/Installation kit No. 65 90 0 028 873 84 64 25,805 (others see cover sheet)
Installation Instructions no. 01 29 0 029 541 01 29 0 029 544
Issue date: 04.2001
10. To install the basic wiring harness A and power supply wiring harness B in E39/2 cars
0
Cars without an on-board monitor radio only
Disconnect the black 12-pin plug casing
X13598
from the radio connection plug (20) and tie it back.
Connect branch
A2
, black 12-pin plug casing, to
the cleared slot (21) in the radio connection plug
(20).
If the car does
not
have a black 12-pin plug
casing
X13598
, branch
A2
must be
connected direct.
"
0
This step only applies to cars
without an
existing mute cable
on the radio connection
plug (20)
PIN10
of the 8-pin plug casing
X18126
.
"
Connect branch
A3
, socket contact, white/brown
cable, to the free slot in the radio connection plug
(20)
PIN10
on the 8-pin plug casing
X18126
.
0
This step only applies to cars
with an
existing mute cable
on the radio connection
plug (20)
PIN10
of the 8-pin plug casing
X18126
.
"
Carefully cut open the sheathing of the audio
wiring harness (21) for a length of 100 mm behind
the radio connection plug (20).
Cut off the basic wiring harness
A
near branch
A3
.
Connect branch
A3
, white/brown cable, to the
supply cable of the radio connection plug (20)
PIN10
, white/brown cable, on the 8-pin plug
casing
X18126
using a 2-way insulation-piercing
connector (1).
20
21
20
A2
A2
X13598
F 39 0973 B
20
F 39 0974 B
A3
X18126/PIN10
20
20
F 39 0975 B
A3
21
1
A
20
X18126
