BMW 2013 F800GT, Руководство пользователя для мотоциклиста

Страница: 36 / 145

responds by flashing a warning
indicating possible ice formation
on the road surface. The display
automatically switches from any
other mode to the temperature
reading when the temperature
drops below this threshold for
the first time.
Engine heat can lead to spurious
readings of ambient temperature
when the motorcycle is station-
ary. When the effects of engine
heat on the monitored tempera-
ture become excessive the dis-
play responds by temporarily re-
verting to "
--
" as the display
reading.
The outside temperature
warning does not mean that
there is no risk of black ice form-
ing at measured temperatures
above 37 °F (3 °C).
At low outside temperatures,
black ice must especially be ex-
pected on bridges and in shady
road areas.
Tire inflation pressure
with Tire Pressure Control
(TPC/RDC)
OE
The figure on the left side 1 in-
dicates the front tire's inflation
pressure, while the figure on the
right
2 shows the inflation pres-
sure in the rear tire. Immediately
after switching on the ignition,
"
-- --
" is indicated. The trans-
fer of the inflation pressure val-
ues does not begin until a speed
of 19 mph (30 km/h) is exceeded
for the first time.
The displayed tire inflation pres-
sures refer to a tire air tempera-
ture of 68 °F (20 °C).
If the warning triangle 3 is
also shown, a warning dis-
play is concerned. The affected
inflation pressure flashes.
The universal warning lamp lights
up in yellow when the affected
figure is at the limit of the ap-
proved tolerance range. If the
monitored tire inflation pressure
is outside the specified range the
universal warning lamp will flash
in red.
Further information on
BMW Motorrad RDC can
be found starting from page
(
69).
3
34
z Displays