BMW 2008 1 Series, Информация о сервисе и гарантии

Страница: 14 / 62

䉯 Brake system connections and lines: Check
for leaks, damage and correct positioning.
䉯 Underbody, incl. all visible parts (i.e. transmis-
sion, rear axle, fuel lines, exhaust system):
Check for damage, leaks and corrosion.
䉯 Steering components: Check for clearance,
leaks, damage and wear.
䉯 Final Inspection: Road test with check of
– Brakes, including burnishing of parking
brake pads
– Steering
– Shock absorbers (visual)
– Transmission
Brake fluid
Maintenance work:
䉯 Replace brake fluid.
Spark plugs (not shown in CBS)
Maintenance work:
䉯 Replace at the following intervals:
– 128i versions: 100,000 miles
– 135i versions: 45,000 miles
Automatic Transmission
Maintenance work:
䉯 Replace ATF at intervals of 100,000 miles.
Emission Control Maintenance
Schedule
The maintenance schedule as shown is required
for the proper functioning of the emission con-
trol systems for optimum vehicle performance
and fuel economy.
Basic Engine
Engine oil As specified by CBS
Engine oil filter As specified by CBS
Fuel System
Air filter As specified by CBS
Ignition System
Spark plugs
(128i versions)
100,000 miles
Spark plugs
(135i versions)
45,000 miles
Emission Control
Components
Oxygen sensor
(except SULEV)
120,000 miles
Oxygen sensor
SULEV (PZEV)
150,000 miles
Evidence of Maintenance Work
This BMW Service and Warranty Information
Booklet should be presented to your BMW cen-
ter when maintenance is required. Make sure
that confirmation of maintenance work is always
entered in this Service and Warranty Information
Booklet. You may need this for any warranty
claims that become necessary, and later on as
evidence that your car has been given the cor-
rect and regular maintenance that justifies its
resale or trade-in value.
8