BMW Motorrad S 1000RR 2013, Руководство пользователя для мотоциклиста

Страница: 56 / 200

Rebound stage, basic
setting, front
Position 2 (comfortable setting
with rider 85 kg)
Position 4 (normal setting with
rider 85 kg)
Position 7 (sports setting with
rider 85 kg)
Make sure that the settings are
identical on left and right.
Factory default settings,
front wheel
Reset the factory defaults as
stated below.
Factory default settings
for compression/rebound
stages, front
Position 4
Adjusting compression-
stage damping for rear
wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Adjust compression-stage
damping for long bump
travel (low speed) by turning
adjusting screw
1 and adjust
compression-stage damping for
short bump travel (high speed)
by turning adjusting ring
2 .
To increase damping: Use the
tool from the on-board toolkit
to turn the adjusting screw or
the adjusting ring, as applic-
able, in the appropriate direc-
tion so that mark
3 or, respect-
ively, 4 points to a higher read-
ing on the scale.
To reduce damping: Use the
tool from the on-board toolkit
to turn the adjusting screw or
the adjusting ring, as applic-
able, in the appropriate direc-
tion so that mark
3 or, respect-
ively, 4 points to a lower read-
ing on the scale.
4
54
z Operation