BMW Motorrad S 1000 RR Скачать руководство пользователя страница 207

Страница: 207 / 320

201

far as it will go to slacken the

chain.

Remove quick-release axle

and remove adjustment

plate

Roll the rear wheel as far for-

ward as possible and disen-

gage chain

from the chain

sprocket.

Pull out brake-caliper sup-

port

to the front and hang

to the side.

Roll the rear wheel back until

it is clear of the swinging arm.

The sprocket and the

spacer bushes on left and

right are loose fits in the wheel.

Make sure that these parts are

not damaged or get lost on re-

moval.

Installing the rear wheel

ATTENTION

Change in tyre size

Effect on control systems

If the rear wheel tyre

size is changed from

190 / 55 ZR 17 to 200 /

55 ZR 17 or vice versa,

the parameters of the

control systems have to be

re-coded by a specialist

workshop, preferably an

authorised BMW Motorrad

dealer.

Содержание S 1000 RR

































































































































































































































































































































Результаты поиска

Содержание S 1000 RR

Отзывы:

BMW Motorrad S 1000 RR, Руководство пользователя для мотоциклиста, Страница: 207 / 320

Результаты поиска

Содержание S 1000 RR

Отзывы: