BMW Motorrad R 18, Руководство пользователя для мотоциклиста

Страница: 86 / 158

82 MAINTENANCE
GENERAL NOTES
The 'Maintenance' chapter describes work
involving the checking and replacement of
wear parts that can be performed with a
minimum of effort.
If special tightening torques are to be
taken into account for installation, these
are listed. An overview of all required
tightening torques is contained in the
chapter "Technical data".
Further information about maintenance
and repair tasks can be obtained on DVD
through your authorized BMW Motorrad
retailer.
Special tools and thorough specialized
knowledge are required to carry out some
of the work. If you are in doubt, consult
a specialist workshop, preferably your
authorized BMW Motorrad retailer.
ONBOARD VEHICLE TOOL KIT
1 Reversible screwdriver insert
Slotted blade and T25 torx
Replacing fuses ( 101).
2 Screwdriver handle
Topping up the engine oil ( 85).
Using with screwdriver insert
3 Torx wrench T30
Topping up the engine oil ( 85).
Removing the rider's seat ( 51).
4 Open-ended wrench
Key range: 10/13
Adjusting spring preload at the
rear wheel ( 58).
Adjusting mirror arm ( 56).
SIDE PANELS
Removing side trim panel
Park motorcycle. Ensure that the ground is
firm and level.
The work steps described here for the
right side trim panel also logically apply
to the left side.
Loosen the side trim panel 2 from retain-
ing pins 1 .
Installing side trim panel
Park motorcycle. Ensure that the ground is
firm and level.
The work steps described here for the
right side trim panel also logically apply
to the left side.
Insert the side trim panel 2 in the holding
pins 1 .