BMW Motorrad R 1200GS Adventure 2014, Руководство пользователя для мотоциклиста

Страница: 129 / 193

Attach air cleaner housing
cover.
Install screws
1 .
Place fuel tank cover 1 in
position, taking care that the
guide
arrowed is underneath
the upper front-wheel fairing 2 .
Install screws 1 , 2 and 3 .
Close stow compartment lid 4 .
Install rider's seat ( 77).
Jump-starting
The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
vehicle electronics.
Do not use the socket to
jump-start the engine of the
motorcycle.
A short-circuit can result
if the crocodile clips of
the jump leads are accidentally
brought into contact with the
motorcycle.
Use only jump leads fitted with
fully insulated crocodile clips at
both ends.
Jump-starting with a donor-
battery voltage higher than
12 V can damage the motorcycle
electronics.
The battery of the donor vehicle
must have a voltage of 12 V.
Park the motorcycle, ensuring
that the support surface is firm
and level.
Remove battery cover (
130).
Do not disconnect the battery
from the onboard electrical sys-
tem when jump-starting the
engine.
7
127
z Maintenance