BMW Motorrad Fit-for-All, Руководство по эксплуатации

Страница: 14 / 48

Status indications of
the LEDs
The blue and white LEDs indic-
ate status as follows:
Blue LED flashes once per
second
The BMW Motorrad Fit-for-
All communication system is in
standby mode
The BMW Motorrad Fit-for-
All communication system is
paired to a mobile phone
The BMW Motorrad Fit-for-
All communication system is in
audio playback mode without
or with audio reception from
another device
Blue LED flashes twice per
second
The BMW Motorrad Fit-for-
All communication system is
paired to another communica-
tion system
Blue LED quick flashes when
Configuration menu is active
The BMW Motorrad Fit-for-
All communication system is in
multipoint pairing
Blue and white LEDs quick-
flash alternately
The BMW Motorrad Fit-for-
All communication system is
searching for a mobile phone
or is in mobile phone pairing
White LED flashes
The BMW Motorrad Fit-for-
All communication system is
searching for another Bluetooth
intercom system
The white LED indicates bat-
tery state of charge when the
device has just been switched
on
When the Configuration
menu is active, the blue LED
lights up for the following
settings
Deleting all pairings
Resetting to factory defaults
Exiting Configuration menu
The BMW Motorrad Fit-for-
All communication system is
in the "Sidetone" mode in the
Configuration menu
Close the flip-front
helmet
Before closing a flip-front hel-
met, position the microphone
in front of your mouth to pre-
vent it getting trapped during
closing. Then close the chin
section.
2
12
z Operation