NTxx23SDHD Camera-back Transmitter Operation Manual
Broadcast Microwave Services
2
1.3
Configuring the transmitter
To change the transmitter’s settings, touch the Select Button for about 3 seconds to enter the menu.
NOTE: If the menu is already activated and does not allow any further commands from any of the
control buttons, the display change back to the start screen after about one minute.
Figure 2. Menu structure
To change any of the settings, enter the associated menu by touching the select button. Use the up or
down arrow buttons to navigate through the menus.
If you are in a submenu the display will appear as below. Two arrows are shown with the different
values which can be set.
If the display OFF time is set to a value between 15 seconds and 240 seconds, the display will turn off
after that time. To “wake up” the display you must slide your finger from the display to the BMS logo,
pressing all three buttons along the way.
SDI
