background image

 

CAUTIONS & SAFETY NOTE 

Following instruction shall be followed to prevent from fire hazard, electric shock and injury 

 

Read carefully all the operation instructions. 
Keep in mind the elementary knowledge of electrical appliances. 
Abide by all the warnings and instructions either marked on the product or mentioned in the documents delivered with the 
machine   
Should any discrepancy be found between the instructions and safety  note, the safety note shall prevail .For  more detail, 
please refer to the sales agency or aftermarket service. 
Remove the power plug prior to clean the surface. Detergent or kerosene is forbidden .Wet rug is all right   
Don’t place the machine onto unstable table. Otherwise, serious injury may happen when falling down in case. 
Nothing is allowed to put on the machine. 
Don’t overload the power socket in case of fire hazard or electric shock. 
Don’t try to dismantle the machine to prevent from electric shock. Only qualified maintenance technicians are allowed to 
repair  the  machine  .You  will  be  exposed  to  dangerous  voltage  or  other  danger  once  the  cover  is  opened  or  removed. 
Improper reassembling may result in future electric shock. 
10

Remove the plug and call qualified technician in following cases

 

The cable or plug is damaged or worn out. 
The machine can’t run in normal operation. 
The machine falls down or the shell is damaged. 
Sudden and obvious changes on the capability of the machine. 
11

Only the parts mentioned in this manual are allowed to adjust. 

12

Keep the manual in file. 

 

Содержание BULUCUT-6






Отзывы: