BMR SFU 0156, Руководство пользователя

Страница: 7 / 20

…when it comes to quality! BMR GmbH
5
4.2 Spindle Connection SL3
(pluggable screw terminals)
Pin Function Description
1 W Spindle Phase W
2 V Spindle Phase V
3 U Spindle Phase U
4 PE Protectiv Earth of spindle and cable shield
4.3 Inputs and Outputs - I/O Interface SL2 (2.54mm Header)
Pin Function Description
1 DI (
Digital Input)
Start / Stop
3 AI
(Analog Input)
Set value for rotational speed
2,4 Ground Ground Ref. for Pin 1, 3, 5, 7, 8, 9, 10 (internally connected with
SL4.3/5)
5 +5V /10mA
max.
auxiliary supply
(1)
6 AO
(Analog Out)
Output 0…10V (free configuration)
Load Percent
7 DO2 Output (for free configuartion)
Open Collector2 Overload
8 +24V / 10mA
max.
auxiliary supply
(1)
(internally connected with SL4.6)
9 DO1 Output (for free configuartion)
Open Collector1 Converter Ready
10 DO1 Output (for free configuartion)
Open Collector3 Duty Speed reached
The scaling of the analog input can be modified, as well as the function of the open collector
outputs can be defined freely. The noted functions are the factory default setup.
On option a remote controller is available which can be connected directly with the I/O interface at
SL2. (
10).
4.4 USB Interface
(alternative with RS232 4.5)
The SFU 0156 has an USB Mini connector for easy access to "SFU-Terminal" configuration program.
You have the options to setup and configure the converter. The USB interface is using the same
interface channel as the RS232 interface (4.5) so that either one of both can be used, only.