BMPRO Trek3, Руководство пользователя

Страница: 18 / 28

18
WATER TANK MENU FUNCTION
Use the Water Tank menu function to choose to monitor and display (enable on/
disable off) a water tank and configure the water tank type (clean/dirty).
Enable and Disable Water Tank Monitoring and Display
Enter Set-Up mode and navigate to the
tanks
menu function. Follow the
directions in figure 8 to enable or disable the monitoring and display of a water
tank with the Trek3.
Figure 8: Enabling and disabling a water tank for monitoring and display with the Trek3
Configure Water Tank Type
Enter Set-Up mode and navigate to the tanks menu function. Follow the
directions in Figure 9 to configure the water tank type. The ability to configure a
water tank type is only available if monitoring of the tank is enabled.
Figure 9: Configuring the water tank type