BMPRO Trek3, Руководство пользователя

Страница: 16 / 28

16
Exiting Set-Up Mode
To exit Set-Up mode or to exit from any menu function available in Set-Up mode,
repeatedly press the BACK button until the Trek3 enters the Home screen.
Alternatively, wait and the Trek3 will automatically revert to the Home screen,
saving any changes made when editing the menu functions.
Set-Up Mode Menu Functions
Table 1 lists the standard menu functions available from Set-Up mode. When in
Set-Up mode, use the up and down scroll arrows to navigate the Set-Up menu
functions.
Table 1: Trek3 Set-Up menu functions
CLOCk
Set time on the Trek3 display
tanks
Configure the water tanks
batCAP
Configure the battery capacity of the battery connected to the BatteryPlus35
bataLm
Adjust low voltage warning thresholds for the low battery alarm
baklIt
Adjust the LCD backlight
advanC
Advanced menu settings. For technical personnel only. The functions available in
the Advanced menu setting may vary with some versions of the BatteryPlus35.
SOLsw
Displays the solar software version, available only when solar source is present
SOLHw
Displays the solar hardware version, available only when solar source is present
BP35 sw
Displays the BatteryPlus35 software version
BP35 Hw
Displays the BatteryPlus35 hardware version
tr2sw
Displays the Trek3 software version
tr2Hw
Displays the Trek3 hardware version
faCtry
To perform a factory reset
If additional devices are connected and installed to the system, additional menu
functions will appear when navigating Set-Up mode.
The additional menu functions will display the CAN ID number of the installed
device, as well as the software (
sw
) and hardware (
Hw
) version number.