BMPRO TrailSafe, Руководство пользователя

Страница: 15 / 24

INITIAL SELF-TEST
1.
Before starting, ensure the TrailSafe or Tr pull pin is in place.
2. Power up the TrailSafe or Tr from your 12V battery as per the wiring
instructions. The LED will display a continuous flashing
PURPLE
, indicating the
first stage of calibration is in progress. This will last for up to 5 minutes.
3. When the first stage is completed, the LED will display a solid PURPLE . When
this happens, pull the safety pin out. The LED will display a continuous flashing
PURPLE again, indicating the second stage of calibration is in progress. This will
last for up to 1 minute.
4. If the LED indicates an alternating PURPLE / RED , the wiring Voltage Drop in the
black/red wire (+v) and/or the white wire (-v) is exceeding 10% of the nominal
voltage. Check the wiring connections and consider increasing the black/red and/
or the white wire size.
5. Once completeted, LED will display a solid PURPLE again. At this stage, put the
pull pin back in. The LED will then display a status indicator. For details, refer to
the
LED Status Indicators
section of this manual.
15