NOTE:
Larger wire sizes may be used. The minimum is shown.
For the black/red wire, a 30A automotive-grade fuse must be located as close to the
trailer battery as possible, but not before the battery charging source feed.
WIRING INSTRUCTIONS
The TrailSafe and Tr have multiple colored wires coming from the rear side
which require connection to ensure correct functionality. As this is a safety critical
system, all wiring should be done by a suitably qualified Auto Electrician.
If you are using the TrailSafe, wire it to the house battery, trailer brakes and brake
lights. Refer to
If you are using the Tr along with BMPRO’s SwayControl, wire the Tr
to the house battery, trailer brakes and brake lights. Refer to
TRAILSAFE
RED
(14AWG / 2.5mm2)
Connect to the positive of the brake lights.
BLUE
(12 AWG/ 4mm2)
Connect to the positive of the brakes.
PURPLE
(14 AWG/ 2.5mm2)
Connect to a remote voltage monitor.
WHITE
(14 AWG/ 2.5mm2)
Connect to the negative of the house battery.
BLACK
/
RED
(12AWG / 4mm2)
Connect to the positive of the house battery (30A fuse
required).
GREEN
(20AWG / 0.5mm2)
If using LiFePO4 Unconnected: connect to the positive
terminal of the house battery.
If using Lead Acid: connect to the negative terminal of the
house battery.
WARNING
The green wire must be connected to a battery positive terminal when a LiFePO4
battery is used. Failure to do so may result in false battery capacity information.
Failure to install the fuse may result in permanent and serious
failure or damage to the TrailSafe and/or the wiring.
WARNING
10
Содержание TrailSafe
Страница 1: ...TEAMBMPRO COM OWNER S MANUAL TrailSafeSERIES TrailSafe TrailSafe MODELS ...
Страница 2: ......
Страница 5: ...5 ...
Страница 7: ...7 ...