BMPRO RVView2, Руководство пользователя

Страница: 10 / 20

10
e
BATTERY STATUS INDICATOR
Displays the status of the caravan battery connected to the BatteryPlus35-II.
The charging indicator will only appear if the positive current to the battery is 1.0A or
higher.
r
SYSTEM VOLTAGE
Displays the system voltage.
If a caravan battery is connected to the BatteryPlus35-II, the RVView2 will display
battery voltage. Otherwise the RVView2 will display the output of the BatteryPlus35-II
when in Power Supply Mode.
t
BACKLIGHT/SCREEN CHANGE BUTTON
Press the backlight/screen change button to turn the backlight of the RVView2 screen
on.
To switch the screen between the power information screen and the water tanks
screen, press the backlight/screen change button to turn the backlight on, then press
the button again to change the screen.
The backlight will automatically turn off after 30 seconds.
y
OUTPUT CURRENT
The current provided by the BatteryPlus35-II to power loads connected to the unit.
The RVView2 can only show current higher than 0.5A. Anything lower than 0.5A will be
displayed as 0.0A.
u
INPUT CURRENT
The total current drawn by the BatteryPlus35-II, from its input sources, to power loads
connected to the BatteryPlus35-II and to charge the caravan battery.
If the BatteryPlus35-II is charging the battery, the input current minus the output
current will indicate the battery charging current.
The RVView2 can only show input current higher than 0.5A. Anything lower than 0.5A
will be displayed as 0.0A.
This display may be blank if there are no input sources available and the battery is
disconnected.
Figure 4: RVView battery status indications
BATTERY IS IDLE
AND 100% CHARGED
BATTERY IS IDLE BUT
IS NOT 100% CHARGED
BP35 IS CHARGING
THE BATTERY
CONNECTED BATTERY
IS DISCHARGING