12
WARNING
Not all DC-DC chargers in the market used to boost auxiliary charging voltage from
the towing vehicle are compatible with the ASPower.
The ASPower is designed to work with BMPRO’s
8.
Solar Input
The ASPower supports the use of panels up to a total of 450W. Input current to
the solar regulator is limited to 27A, the equivalent of 3x150W solar panels.
The solar input is unable to operate in Power Supply Mode, i.e. with no caravan
battery connected.
9.
Battery Fuse
40A automotive battery fuse.
5.
CAN Bus Communication
To connect to and power BMPRO accessories, such as the ASDisplay and BC300
+ CommLink.
6.
Load Isolation Switch
To connect the caravan’s load isolation switch. This switch is used to enter
Storage Mode and power off all outputs (load terminal block and CAN bus) on
the ASPower, except for the 40A output.
Battery charging is not affected by use of the load isolation switch.
7.
Auxiliary (AUX) Input
AUX input is designed for use with 12V DC power sources. The voltage of the DC
power source connected to the AUX input must not exceed 14.8V.
AUX will be available to charge the battery if the AUX voltage exceeds the battery
voltage by at least 0.5V.
WARNING
To ensure continuous air-flow, the fan ventilation holes must never be blocked,
otherwise the temperature of the ASPower may rise and inhibit the optimal operation
of the ASPower and/or cause the ASPower to shut down. The ASPower will
automatically restart once it has cooled to an acceptable level.
4.
Fan
Regulates the internal temperature of the ASPower.
Содержание ASPero
