04/05/2015
PAG 15
4. INSTRUCTION FOR USE
1
Check that the commuter ( A ) is in “ OFF “ position.
2
Turn on the sterilise with the knob ( A ).
3
Regulate the intensity of the heat of the sterilizer using the regulator of inten-
sity (C).
4
Set the work time, from 1 to 60 minutes, with the timer ( B ).
Practical advice:
Turn the sterilizer on mod. 619, set the desired temperature and wait at
least 10 minutes before using it, so that the internal structure is properly heated.
Recommend temperatures:
To sterilize metallic tools like scissors, blades or razors, etc……
we
recommend to set temperature not less than 110°C.
Temperature can chenge in spite of type and quality of tools to be sterilized.
It is
really important that temperature is not less than 110°C.
Do not sterilize plastic tools since they con melt.
Maximum temperature reachable is: 230 °C.
CAUTION
check that the electric supply of net is equal to the suitable
one on the lable situated nameplate on the rear of the
apparatus.
5. MAINTENANCE
This apparatus doesn’t require a particular maintenance; we recommend to keep clean
from dust. This operation can be done also from not specialized personal, but before
effecting any cleanin, make sure that the appliance es unpluged.
6. PROBLEM SOLVING
If rotating the knob “ A “ and the appliance does not turn on, check that the plug is
well insered into the socket.
In case of any disfunction contact permitted technicians only.
7. TECHNICAL DATA
See back side of appliance