BML dCam3, Инструкция по эксплуатации

Страница: 4 / 54

- 3 - - 4 -
- The video audio can be muted and unmuted by pressing the Up button and the
display can be switched on and off by the button.
Gallery Mode
- The Up/Down buttons are used to navigate through the individual videos and the
OK button starts and stops the recordings.
- The Up/Down buttons are used to increase or lower the volume of the recordings,
and, by holding down these buttons, the videos may be fast forwarded or rewound.
- By holding down the OK button, mini icons of the videos can be displayed. The Up/
Down buttons can be used to navigate through them and the OK button can be
used to make selections.
Protecting and Deleting Recordings
- The device separates recordings into individual clips. Should the memory card beco-
me full, then the oldest clips will be replaced by the new ones. If there is a recording
that you would like to save then it must be protected as follows:
1) Select the desired recording in gallery mode.
2) Press the MENU button.
3) Choose between deleting, locking or unlocking the clip.
4) Choose whether you would like to select a single item or all of them.
- Recordings that are currently being made can also be manually locked by using
the / button.
Connecting to a PC
1) Connect the camera to the PC with the USB cable supplied.
2) Confirm the choice of Mass storage by pressing OK.
3) The PC will recognise the camera as an external disk and recordings can be played
and copied.
Resetting
Should the camera freeze, poke a paper clip (or similar object) into the RESET hole to
gently press the internal button. The camera will switch off.
Video Settings
- Resolution – Full HD 1920x1080, HD 1280x720, VGA 640x480.
- Loop recording – Enables recordings of individual lengths from 1–5 minutes.
-
Exposure
– Controls the brightness of the screen (the higher the number, the bri-
ghter the screen).
-
Motion detection
– The camera automatically begins recording when any motion