background image

11 

 

Power Badger™ Limited Warranty 

 

  Limited Warranty - This limited warranty is expressly limited to Bostic Motors Inc’s products (hereafter referred to as 

The Company”

) that have been purchased by the original consumer purchaser or for purposes of resale or in the 

ordinary use by the end-user. The term original consumer (end-user) purchaser is defined as the person who purchases 
Company products for personal, residential or business use.  

  The Company's products are warranted against defects in materials and workmanship for a period of one year from 
date of purchase by consumer / end-user. The exclusive remedy for any product found to be defective during this 
limited warranty period consists of the repair or replacement of the defective product. This limited warranty does not 
apply to defects which arise from normal wear and tear, accident, misuse, abuse, neglect, mishandling, misapplication, 
faulty installation, modification, improper or extraordinary use or use inconsistent with any instruction or 
recommendation issued by the Company.  

  The foregoing limited warranty is exclusive and in lieu of all other warranties, whether written or oral, express, implied 
or statutory.  

NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. THE LIMITED 
WARRANTY CONTAINED HEREIN DOES NOT EXTEND TO INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM 
THE USE OF THIS PRODUCT, OR ARISING OUT OF A BREACH OF THIS WARRANTY.  

 To obtain performance of this limited warranty, the alleged defective product must be returned, together with 
reasonable proof of purchase, written explanation of the problem and postage or freight prepaid, directly to: 

In U.S.A & Canada:  

Bostic Motors Inc, Attn: Warranty Claims 

157 North Main St.  

Bostic, NC 28018 

 

  The Company will return the repaired or replaced product, postage or freight prepaid. Final determination of defects 
shall be made in accordance with procedures established by the Company.  

  This limited warranty gives the original consumer purchaser specific rights. You may have other rights which vary from 
state to state or province to province depending upon the location of your residence. Some states do not allow the 
exclusion or limitation of incidental or consequential damages.  

  Manufacturer's rights retained: The Company reserves the right to make changes in design, additions or improvements 
to any of Its products at any time without incurring any obligation whatsoever to install or replace the same or improve 
upon products previously manufactured. 

 

        Bostic Motors Inc. - Rev. 09/2017 

Содержание 1800US












Отзывы: