BP104
© BMC Messsysteme GmbH
Page 2
Analog input plug P3
The connection for the 8 analog inputs is realized as a 20 pole pin connector.
Pin
Analog IN
Function
1/2
+IN1/-IN1
measuring amplifier input 1
3/4
+IN2/-IN2
measuring amplifier input 2
5/6
+IN3/-IN3
measuring amplifier input 3
7/8
+IN4/-IN4
measuring amplifier input 4
9/10
+IN5/-IN5
measuring amplifier input 5
11/12
+IN6/-IN6
measuring amplifier input 6
13/14
+IN7/-IN7
measuring amplifier input 7
15/16
+IN8/-IN8
measuring amplifier input 8
17/18
+5V
current output for sensor supply
19/20 GND
GND
potential
Analog output plug P1
The connection for the 8 analog outputs is realized as a 16 pole pin connector.
Pin
Function
1
measuring amplifier output 1
3
measuring amplifier output 2
5
measuring amplifier output 3
7
measuring amplifier output 4
9
measuring amplifier output 5
11
measuring amplifier output 6
13
measuring amplifier output 7
15
measuring amplifier output 8
2,4,6,8,10,12,14,16 ground
(GND)
PC/104 system connector
The PC/104 system connectors of the
BP104
are used for power supply only. All other lines are just connected through
the PC/104 system connector. The pin assignment complies with the PC/104 standards. For further information about
the PC104 standard visit the web at
The +5V DC are lead out at pin B3, B29 and D16 of the PC/104 system plug. The 0V can be taken from pin A32, B1,
B10, B31, B32, C0, D0, D18, D19 of the PC/104 system plug.
