Polymate
®
YH-1000C Polysomnograph User Manual V3.1
40
The first content is data filename. The second is data type. Having the above two contents set up,
click "OK" and the pop-up dialog box of patient information (Figure 3) is shown on the display
screen.
Figure 3 Patient information input
Recording start time is set by system at the beginning of the recording time which is confirmed by
the internal clock. If the recorder clock is not correct, you can modify it in the above login screen.
The recording end time defaults to 12 hours after the record start. In fact, in the process of data
transmission, the system can automatically identify the actual end time of record. Recorder will
automatically stop after data transmission is finished. So you need not to change the recording
end time in normal situation.
If the patient information was login in the recorder already, the system will automatically fill in the
corresponding content; otherwise you need to enter one by one.
When the login information input is finished, select “OK”. Then computer begins to receive the
recorded data. When data transfer is finished, the system returns to communications dialog box.
At this time in the dialog box select "disconnect" or "return", recorder will automatically exit from
the communications status.