3.B
3.C
3. Installing and Operating your Water Feature
a. Unwind the Pump and Valve (F) (Now to be referred to as
“pump”) and Water Feature Light and Transformer (A&B)
power cords and run them behind the half circular cut
behind the reservoir as shown in Fig 3. A.
b. Connect the Fountain Light (A) to the Transformer (B) as
shown in Fig. 3.B.
c. Lift your waterfall into place and engage the bracket on the
back of the fountain by lowering it onto the Wall Bracket
(F) as shown in Fig 3.C.
d. After mounting your water feature to the wall, you can now start to connect the Pump
(F). Install the Pump and Quick Connect Valve (D) as shown below. Simply attach the
valve by engaging the receiver and twisting into position. See Fig 3.A & 3.B
3.A
3.B
e. Position your Water Feature Lights (A) as shown in Fig 3.D- 3.F.
3.D
3.E
3.F
f.
Fill the reservoir with water. We recommend filling the water up to the bottom of the
3.A