blupura WAVE I.T., Руководство по эксплуатации и обслуживанию

Страница: 24 / 36

24
Fig. 24.1
Fig. 24.2
Fig. 24.3
Electrical connection
The connections must comply with local
regulations. The grounding of the unit is
a legal requirement.
Connect the power cord to the IEC inlet
(1) and to a socket.
Turn the unit on by selecting the “I”
position on the main on/off rocker switch
(2). The compressor and fan are now
activated.
On the FIZZ models, press the “Sparkling
Water” button on the right (4) in order
to release any air in the circuit and to
allow the pump to activate and fill the
carbonator with water.
After around 1-2 minutes, the sparkling
water pump stops.
Thermostat
The thermostat (3) is set in the maximum
position to control the ice bank.
If you want to avoid the formation of ice
in the bank, turn the thermostat screw at
least 1/4” anti-clockwise.
1
3
4
2