blupura BLUTOWER, Руководство по эксплуатации и обслуживанию

Страница: 13 / 28

13
Functions of the volumetric keypad
The dispensing head VOL mod. is equipped with a VOLUMETRIC dispensing
system. The dispensing quantities are easily PROGRAMMABLE during installation.
BUTTON FUNCTIONS:
- SPARKLING WATER UPPER DISPENSER button (P.1)
- COLD WATER UPPER DISPENSER button (P.2)
Push the button for 1 second to dispense a short dose of water (a cupful, 200 cc),
push it for more than 3 seconds for a long dose (1 litre). The dispensing stops
automatically when the pre-set quantity is reached or you can stop it at any time
pushing the button again.
SETTING THE QUANTITIES:
Thanks to the Volumetric dispensing functionality, you can customize the pre-set
quantities dispensed by each of the 2 buttons.
To enter the programming mode, press and hold (for > 4 seconds) the following
combination of buttons: P.2 + P.3 (cold water SET UP button). When you
enter the programming phase, you will hear three consecutive beeps.
In this phase, the LEDs L.1 and L.2 start to flash.
To set the maximum dispensing limit for a specific button, press the button in
question to start the dispensing process (1 second for the short dose, more than 3
seconds for the long dose) and press it again once you have reached the desired
quantity.
To exit from the programming mode, press and hold (for > 4 seconds) the
following combination of buttons: P.2 + P.3 (cold water SET UP button),
save the data and set the new limits.
The maximum settable quantity for each button is around 3 litres, which equates
to a 65-second dispensing session.