4
EN
OPERATING INSTRUCTIONS
Voltage: 22 V
Frequency: 50 Hz
Power: 45 W
REMOTE CONTROL ASSEMBLY
The remote control requires 2 AAA batteries (not supplied) for operation. To install the
batteries, simply press the indentations on the back of the remote control with your thumb
and remove the cover. Insert the batteries according to the diagram shown inside. Replace
the cover.
Assembly
1
4
2
grille locking nut
3
blade cap
5
fixing
clamps
1. Remove the locking nut from the fan stand by turning it counter clockwise. Place the fan
stand onto the base and fix it in place by replacing the locking nut and locking it tightly
by turning it clockwise (see Fig. 1).
2. To assemble the safety grille and blade components, loosen the blade cap by turning
it clockwise. Then loosen the grille locking nut from the motor housing by turning it
anticlockwise.
3. Place the rear safety grille firmly onto the motor housing and fasten it by turning the
grille lock nut clockwise until tight, making sure that the rear safety grille fits onto the
locking lugs on the motor housing (see Fig. 2).
4. Push the blade onto the motor shaft and fix in place using the blade cap, by turning it
anticlockwise (see Fig. 3).
5. Place the front safety grille against the rear safety grille. Align the holes, close the fixing
clamps and insert and tighten the safety screw (see Fig. 4/5).
