15
EN
INSTALLATION
Important Notes on Installation
• Unpack the heater making sure that all the items are present and that
there are no components left in the box and that the heater head is free
from any packing material.
• Using the detailed drawing follow the steps to assemble your heater.
• Do not connect the heater to the power supply until all the assembly is
complete.
• Do not connect the heater to the power supply if any of the components or
the power cable is damaged in any way.
Assembly
Note: Make sure the heater is turned off before hanging under a balcony or
roof.
1 Make sure that hook (A) is securely attached to the heater.
2
Attach hook (B) to a secure post, beam or fixed object. You can also attach
the hook (B) to the hook (A) to avoid an obstacle, e.g. a horizontal bar.
3 When the heater is securely installed, plug the plug into the wall outlet.
Note: Wait until the heater’s heating element has cooled down before
moving it.
You must always
make sure that
there is at least 50
cm of empty space
above the heater,
25 cm from the
side and 180 cm
below the heater.
