Blumax GPS-4043, Руководство пользователя

Страница: 9 / 23

- 8 - - 9 -
Please follow the procedure step by step.
Step 1 Charging Your Battery
To charge your GPS-4043 Recorder data logger, you have to plug your USB cable
into the power source. Charging time is about 3~4 hours and you can charge from
PC/ Notebook’s USB HOST or from cigarette-lighter in car.
For the 1st time you use the GPS-4043 Recorder, please charge battery until it is
full (the green LED blinks). The LED that represents the battery is the right-most
battery icon (shown in below).
2.2 Getting Started
• If the LED is red, that means battery power is critically low. Charge immediately.
• If the LED is green, that means battery is charging now.
• If the green LED is blinking, that means battery is fully charged.
LED,
represents
the battery
status