bluMartin freeair plus, Руководство по эксплуатации

Страница: 13 / 28

Operation
11 [ O ]
Comfort-Operation
The freeAir plus will operate in Comfort-Mode after it is turned on.
The device will automatically operate as expected: The connected
Preferred Room will be supplied with as much fresh air as possible
(based on intended use of the device, correct installation and available
fresh air in the Outdoor Air Room, fresh air is drawn from).
The freeAir plus will take minimal ventilation, VOC content, relative and
absolute humidity, temperature and potential cooling into account.
Use the
–Button to select Comfort-Level 1 (one blue LED is lit), if you
are sensitive to noise in the bedroom. Comfort-Level 3 is considered
standard operation.
Turbo-Operation
If you wish to ventilate for 30 minutes at the highest power level, press and hold the
–Button
until you hear 4 short beeps.
Normal Comfort-Operation will resume afterward. Maximum power ventilation can be
interrupted by pressing the
–Button.
Reset
Press and hold the
–Button for 20 seconds until all LDS are off.
The freeAir plus will respond with a software reset, (also required for a software update), and
return to normal Comfort-Level operation.
Note
The freeAir plus includes a VOC-sensor that measures the concentration of volatile organic
compounds, thereby comparing air quality in both connected spaces. To simplify, VOC data is
converted to CO
2
values.
Beep
→
Comfort-Level
Beep
Beep
Beep
Beep
→
Turbo
15 Seconds
→
Reset