BLUM ZMM.2750.01, Руководство пользователя

Страница: 3 / 56

3
How to use this instruction
leaflet
Safety information
Understanding this manual
Remaining risks according to ISO EN
12100-2
Safety information
Symbols and their descriptions
Safety decals
Intended use
➢ Please keep a copy of the instruction leaflet.
➢ Read the instruction leaflet and the safety information before operation.
■ The assembly device complies with current safety standards. However, there are
remaining risks.
■ Other remaining risks are indicated by the safety decals and in the following safety
rules. It is therefore absolutely necessary to follow all safety instructions carefully.
■ Disconnect the assembly device from the compressed air before retooling or per-
forming any work in the area of the pneumatic unit.
■ You should always check that all safety devices are functioning properly before
use. Replace damaged parts with original Blum parts.
■ CAUTION: For your own safety, use only those accessories which are recommen-
ded or indicated in the manual or Blum sales literature.
■ Do not make any alterations or modifications to the assembly device.
■ If there are any questions and/or problems, please contact the BLUM Customer
Service Department.
Indicates important safety rules which must be followed!
Read the instruction leaflet and the safety information in full before opera-
ting the assembly device
The intended purpose of the assembly device is the pressing of LEGRABOX dra-
wers. The assembly device should only be used in manufacturing. The manufacturer
does not assume liability for other uses not described in the instruction manual.
Only one person at a time should operate the machine.
Do not adjust by hand or using tools in the area of the clamping cylinder -
RISK OF CRUSHING!
Wear appropriate eye and face protection when operating this machine.
Indicates an important comment.
EN