–
–
1
2
3
4
BA-139
10
CMIIT ID: 2010DJ2701
TRC/LPD/2010/30
RCPBL2110-0423
ESD – 1004975C
CCAB11LP0510T8
Approved by IDA
for use in Singapore�
N1658-10
TA-2010/270
Approved
이 장비는 전자파를 발생하나 가정에서 사용
되기에 적절한 장비이며 가정을 포함한 모든
곳에서 사용이 가능합니다.
This equipment is home use (Class B)
electromagnetic wave suitability equipment
and to be used mainly at home and it can
be used in all areas�
Replacing the battery
When the battery power begins to weaken, the battery display (LED) begins to flash red�
Open the SERVO-DRIVE switch and
remove the battery holder
Remove the battery
Insert new battery (type CR2032),
please note proper pole connections
(+/-)
Close batter holder
The SERVO-DRIVE switch battery must not be recharged or thrown into fire�
If the battery is inserted incorrectly, the SERVO-DRIVE switch battery display flashes red�
NOTE
1
2
3
4
This product corresponds to section 15 of FCC regulations.
It's use adheres to the following criteria:
1�) the component may not cause any adverse health affects�
2�) the component must be able to handle interferences, even those which could trigger unintentional
operation�