BLUM MINIPRESS top M70.2000, Инструкции по безопасности, инструкции по установке и информационный листок

Страница: 29 / 56

111 mm
60 63
83
82
29
MINIPRESS top
Setup
*Horizontal drilling setup
* The horizontal drilling function is not
available with type M70E2000.
Clamping the drill bit
➢ Only use Blum original drill bits.
➢ Slide the drill bit [83] onto the drilling spindle up to the stop [82].
➢ Tighten the screws securely.
➢ Set the main switch [63] to "ON".
➢ Set the work mode selector switch [60] to"TEST".
red red black
Drill bit equipment
■ The length from the cutting edge to the gearbox must be 111 mm.
■ Always check that the drill bit is secure before start-up.
NOTE