Bluezone PK-220, Инструкция по установке, эксплуатации и обслуживанию

Страница: 24 / 31

Document #: BPI-PM013-00
23
Service
BULBS NEED TO BE REPLACED AFTER 8,800 HOURS OF USE. BULB KITS MUST BE
PURCHASED DIRECTLY FROM BLUEZONE PRODUCTS OR AN AUTHORIZED PARTNER
AS THEY ARE
PROPRIETARY BULBS.
Bulbs must be replaced at 8,800 hours of
operation. The display screen reads bulb
hours of operation remaining. At 1,600
hours remaining the display screen will turn
yellow and read “Replace Bulbs.” The bulbs
should be ordered and replaced
immediately. At 0 hours remaining, the
display screen will turn red and the unit will
automatically be powered
OFF until bulbs
are replaced.
After bulbs are replaced, the bulb counter
needs to be reset. To reset the bulb counter
please follow the steps below.
1) Press and hold the bulb counter
reset button for 3 seconds. The
display screen will read “Hold: reset
counter” during the 3 second hold.
2) After holding for 3 seconds, the
display screen will read “push to
confirm.” Release button and push
to confirm reset.
A bulb replacement kit and instructions can
be ordered from Bluezone Products or its
Authorized Partners. The Lamp
Replacement Kit for the Bluezone PK-220
is: 005-000008.
Please call 781-937-0202 or email
info@bluezonefresh.com for ordering
information.
IMPORTANT: Each bulb kit satisfies
replacement parts for 1 unit. The four bulbs
in each replacement kit cannot be replaced
with bulbs purchased from anywhere, but
Bluezone Products or an Authorized
Partner. Installation of the incorrect bulbs
results in a voided warranty and potential
harm. Purchase of bulbs from an outside
vendor results in a voided warranty.
Bluezone will not operate correctly with
bulbs purchased from outside vendors.
Service Kit includes:
•
(4) U-shaped bulbs
•
(2) Nitrile gloves
•
Extra fasteners
Additional tools needed:
•
¼” hex nut driver