12
Complete User manual
After installation
When Spirit is installed, and after each maintenance, the following
procedures must be perfomed before operation.
Flush Spirit
Do not drink the water when the water purifier flushes. It is not safe to
use.
The water purifier should always be flushed:
•
when it is new and has not been used,
•
when it is installed again after storage/freeze protection
•
when it has been cleaned
•
when the membrane has been replaced.
1
3
2
14-16 s
4
6
5
6
7
Spirit 300
Open the clean water valve immediately when the service button is
released. If not, the Spirit can be damaged.
Figure 15.
25-30
min
8
9
10
11
Spirit 300
Flush Spirit
Do a check for leaks
See “Do a check for leaks” on page 13.