Blueview BV-3100, Руководство пользователя

Страница: 3 / 24

IMPORTANT SAFEGUARDS
When using electrical products, basic safety precautions should always be followed, including the
following:
READ ALL INSTRUCTIONS BEFORE USING
DANGER –
To reduce the risk of electrocution:
1.
Always
unplug the BV-3100 control box immediately after using.
2.
Do not
place or store the control box where it can easily fall or be pulled into water.
3.
If the box does fall in the water,
unplug before retrieving.
WARNING –
To reduce the risk of burns, electrocution, fire, or injury to persons:
1. Use this sonar only for its intended use as described in this manual. Do not use attachments not recommended by BlueView
Technologies.
2. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or
if the control box has been dropped into water.
3. Keep cords away from heated surfaces.
4. Connect this product to a properly grounded outlet only. See grounding instructions.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. The BV-3100 control box is equipped with a cord having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly installed and grounded.
DANGER
– Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. The wire
with insulation having an outer surface that is green with or without yellow stripes is the grounding wire.
Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to
whether the product is properly grounded.
This product is factory equipped with a specific electric cord and plug to permit connection to a proper electric circuit. Make sure
that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. Do not
modify the plug provided—if it will not fit the outlet, have the proper outlet installed by a qualified electrician. If the product must be
reconnected for use on a different type of electric circuit, the reconnection should be made by qualified service personnel.
If it is necessary to use an extension cord, use only a three wire extension cord that has a three-blade grounding plug, and a
three-slot receptacle that will accept the plug on the product. Replace or repair a damaged cord.
BV-3100 User’s Handbook 15 April 2009
Page 2