Hardware User Manual - Sentis3D-M530
Last change: 27 April 2016
Version
2
Bluetechnix ©
Page 15 | 23
5
Specifications
5.1
Electrical Specifications
5.1.1
Operating Conditions
Symbol
Parameter
Min
Typical
Max
Unit
V
IN
Input supply voltage
18
24
30
V
I
IN
Input current
-
2
3.5
A
T
OP
Operating Temperature
0
-
60
1)
°C
T
STG
Storage Temperature
-65
-
150
°C
FITP
Frame-rate Integration Time Product
-
TBD
-
Table 5-1 Electrical characteristics
1)
Depends on cooling mechanism.
5.1.2
ESD Sensitivity
ESD (electrostatic discharge) sensitive device
. Charged devices and circuit
boards can discharge without detection. Although this product features patented
or proprietary protection circuitry, damage may occur on devices subjected to
high energy ESD. Therefore, proper ESD precautions should be taken to avoid
performance degradation or loss of functionality.
5.1.3
EMC
The system is intended for light industrial environments according to the following normative:
EN55022 class A, EN55024:2010
Only pre-compliance measurements according to the above stated normative will be performed on the
system. The customer responsible for the final product is also responsible to fulfill all regulations requested
by law.
