Bluetechnix
www.tinyboards.com
Maximum Power at Minimum Size
Blackfin EVAL-BF5xx Hardware User Manual
Page 3
2 Specification
2.1 Functional Specification
Button
LED
Reset
2V5 Voltage
Regulator
3V3
Regulator
USB/UART
Switch
60-pin : Data & Addr. Us, Mem. Control, (PPI2)
60-pin : JTAG, PPI-1, SPORT0, (SPORT1),UART, SPI, PFs
CM-BF533
or
CM-F561
Coremodule
JTAG
Connector
USB-UART
Converter
USB Device
Connector
UART
Expansion
OmniVision
Camera
Connector
SD-Card
Connector
PPI1
SPI
Optional
Power
Connector
UART
JTAG
Figure 2-1: Detailed Block Diagram
Figure 2-1 shows a detailed block diagram of the EVAL-BF5xx Board.
From the
Power connector
or the
USB Device connector
power connects to a 1 Ampere linear
voltage regulator that powers the coremodule.
The serial port of the coremodule can be routed directly to the
USB Port
(USB/UART Switch
Position A towards the board edge) or to the
UART Expansion Pads
(USB/UART Switch
Position B towards the coremodule).
The two
60-pin expansion connectors
bring al pins of the Coremodule (Section 2.2.3 and
2.2.4) directly on the expansion slot.
An
SD-Card connector
mounted at the bottom of the board allows making use of file IO
Functions delivered with the Blacksheep Software. Blacksheep supports SD-Cards up to 512
MB and includes a FAT16 files systems as well as the most relevant File IO Functions.
Adding a Camera Kit to the EVAL-BF5xx Board allows connecting directly a high
performance OmniVision Camera to the board via the OmniVision Camera connector.
Blacksheep Software fully supports drivers for the Camera Module.
