Bluetechnix
www.tinyboards.com
Maximum Power at Minimum Size
Blackfin EVAL-BF5xx Hardware User Manual
Page 2
Expansion Connector 1
o
SPORT 0
o
JTAG
o
UART
o
SPI
o
PPI-1 (Parallel Port Interface 1)
o
PFs (Programmable Flags)
Expansion Connector 2
o
Data Bus
o
Address Bus
o
Memory Control Signals
o
PPI-2
1
(Parallel Port Interface 2)
o
Power Supply
The Camera Module as well as the SD-Card as shown on the cover page are not
included in the EVAL-BF5xx Board.
For the Camera Module the Kit-CAM-OV1 can be purchased from Bluetechnix.
1.2 Related Products
CM-BF533:
Blackfin DSP Processor Module powered by Analog Devices single core
BF533 processor. Up to 600MHz, 32MB RAM, 2MB Flash, 36x31mm, 120
pin expansion connector, BGA option.
CM-BF561:
Blackfin DSP Processor Module powered by Analog Devices new dual core
BF561 processor. Up to 2x 600MHz, 32MB RAM, 4MB Flash, 36x31mm,
120 pin expansion connector, BGA option.
DEV-Blackfin: Blackfin DSP Development board with two sockets for any combination of
CM-BF533 and CM-BF561 core modules. Additional periphery is available,
such as CF-Card, SD-Card, DP-Ram, Ethernet, USB host and device, multi-
port JTAG and 2 connectors for a digital stereo camera system.
Kit-CAM-OV1: Camera Kit including one OmniVision OV7648 camera for the Blackfin
core boards and the respective software driver
1
Only available when using the CMBF561 Coremodule
