LISTENING TO A BLUETOOTH DEVICE
After successfully pairing your Bluetooth device with the
W-PR001BT
, you can begin
playing music simply by choosing the song you wish to hear on your device’s menu system
(refer to your device’s user manual for instruction on playing music).
To Play or Pause music press the
SNOOZE
button
(4)
To Skip to the Next song press the
NEXT / MINUTE
button
(7)
To Skip to the Previous song press the
PREV / HOUR
button
(6)
NOTE:
All Playback controls (Play, Pause, Skip + / -, etc.) can also be controlled directly on
your Bluetooth device.
LISTENING TO RADIO
1.
Press the
FUNCTION
button
(1)
repeatedly until the LED Display shows a FM Radio
frequency (such as “93.3” or “103.3”).
2.
To listen to AM Radio simply press the
FUNCTION
button
(1)
until the LED Display
shows an AM Radio frequency (such as “880” or “1040”).
3.
To change to a different Radio Station (Frequency) press the
NEXT / MINUTE
button
(7)
to tune to a higher numbered station, or press the
PREV / HOUR
button
(6)
to tune to a
lower numbered station.
•
TIPS FOR BEST RECEPTION
o
The AM & FM antennas are built-in to the cabinet of this player. To improve
reception of radio stations simply move the entire player to another location
until reception improves.
RADIO PRESETS
This Alarm Clock can store 10-FM & 10-AM radio stations in the Preset memory. To store
preset stations follow the steps below.
1. Use the
NEXT / MINUTE
(7)
or
PREV / HOUR
(6)
buttons to tune to the desired radio
station.
2. Press & hold the
CLOCK / MEMORY
button
(2)
until “
P01
” flashes on the LED Display.
3. Use the
NEXT / MINUTE
(7)
or
PREV / HOUR
(6)
buttons to choose which preset
(P01 – P10) you wish to use for the current Radio Station.
4. Press the
CLOCK / MEMORY
button
(2)
to set the current Radio Station to the selected
preset shown on the LED Display.
5. Repeat steps 1-4 to set additional presets into the memory.
To tune directly to your Radio Presets simply press the
CLOCK / MEMORY
button
(2)
repeatedly to cycle through the Presets stored in the memory.
NOTE: Some buttons have multiple functions based on if the function requires a
“Press” (Press & Immediately Release the button) command or a “Press & Hold”
(Press & Hold the button for 1-2 seconds) command.
8
