PLATINUM MATRIX
USER MANUAL
11
contact
[email protected] / [email protected]
Infrared (IR) Control
Remote Control Description
The Blustream Platinum matrix units are supplied with IR Remote Control for source selection and general setup.
As well as controlling matrix solutions using the original Blustream remote the Blustream products can be controlled
using the original Infrared RC5 codes shown at the rear of this manual.
OUTPUT AND INPUT SELECTION
A
Select the zone OUTPUT you wish to change the source on
(Numbers 1-8 correspond to the zone outputs 1-8).
B
Select the source INPUT you wish to change on the selected zone
to (Numbers 1-8 corresponds to the source inputs 1-8)
C
Press PTP button If you wish to instantly mirror all inputs and
outputs (Example - Input 1 to output 1, input 2 to output 2 etc).
EDID Configuration
Fixed EDID to INPUT / ALL INPUTS:
To select video resolution - Press 1080I/1080P/3D/4K
To select Audio resolution - Press 2.0CH/5.1CH/7.1CH
To assign settings to individual input/all inputs – Press INPUT /ALL button
in ‘ZONE INPUT’ area of remote control
Copy EDID of any specific OUTPUT to any assigned INPUT or ALL INPUTS:
Press COPY button
Press OUTPUT zone button you wish to copy EDID from
Press INPUT zone button /ALL button to copy EDID to
User defined EDID to any INPUT or ALL INPUTS:
Press USER1/USER2 button
Press selected INPUT or ALL button to assign EDID
A
B
C
