•
Note: you can control music playback directly on your device or if your device
supports Bluetooth control you can also use the
PLAY/PAUSE (5)
,
SKIP FORWARD
(6)
, and
SKIP BACKWARD (4)
buttons on the rear of the speaker.
PLAYING an iPod®, MP3 PLAYER, or OTHER DEVICE USING THE AUX INPUT
1. Plug one end of a 3.5mm stereo audio cable (not included) into the
AUX INPUT (8)
on the rear of the speaker.
2. Plug the other end of the cable into the headphone jack or audio output of your
external device.
3. Press the
MODE
button
(1)
repeatedly until the speaker is in the LINE IN mode.
4. Adjust the volume on your external device to an acceptable level.
5. Press PLAY on your external device to being listening.
•
NOTE: All playback controls (Play/Pause, Stop, Next/Previous, must be
controlled on your external device)
PLAYING MP3 MUSIC FILES FROM A USB FLASH DRIVE
1.
Insert a USB Flash Drive into the
USB Input (7)
.
2. Press the
MODE
button
(1)
repeatedly until the speaker is in the USB mode.
3.
Press the
PLAY/PAUSE
button
(5)
to begin playing the first track on the Flash Drive
4.
Use the
SKIP FORWARD (6)
&
SKIP BACKWARD (4)
buttons to change music
tracks.
PLAYING MP3 MUSIC FILES FROM A microSD CARD
1.
Insert a microSD Card into the
microSD Card Slot (9)
.
2. Press the
MODE
button
(1)
repeatedly until the speaker is in the microSD / TF Card
mode.
3.
Press the
PLAY/PAUSE
button
(5)
to begin playing the first track on the Flash Drive
4.
Use the
SKIP FORWARD (6)
&
SKIP BACKWARD (4)
buttons to change music
tracks.
REPEAT PLAYBACK (USB & microSD MODES ONLY)
•
To Repeat a Single Track press the
REPEAT
button
(3)
once. The LCD will show
REPEAT ONE.
•
To return to normal playback press the
REPEAT
button
(3)
again. The LCD will show
REPEAT ALL.
•
After the last song on the Flash Drive or microSD card is played, the speaker will
automatically return to playing the first song on the Flash Drive or microSD card
again.
LISTEN TO FM RADIO
1.
Press the
MODE
button
(1)
repeatedly until the speaker is in the FM mode.
2.
Press and hold the
SKIP FORWARD (6)
or
SKIP BACKWARD (4)
buttons to tune to
the desired radio station. The speaker will automatically begin searching for the next
radio station. Once a radio signal is found the speaker will stop searching and begin
playing the station.
AUTO SCAN:
The speaker can automatically scan for available radio stations and store
them into radio presets. To use this feature simply press the
PLAY/PAUSE
button
(5)
to
begin the Auto Scan. Once the Auto Scan has completed you can switch between the
preset stations by simply pressing the
SKIP FORWARD (6)
or
SKIP BACKWARD (4)
buttons.
If the station you wish to listen to was not found during Auto Scan, simply adjust the
FM
Antenna (19)
and perform another Auto Scan until the station is found.
